Easyconfig - Brickcom Bullet Series Hardware User Manual

4.5.1 EasyConfig

To launch EasyConfig, select EasyConfig from the start menu.
Setup type was used in the software installation, an EasyConfig icon was
installed on the desktop. Double click to open the icon.
If Custom Setup type was used in the software installation and an EasyConfig
icon was not installed on the desktop, the program will be installed under
C:\Program Files\Brickcom\EasyConfig unless the program was saved to a
preferred directory.
A. Click <Start> to continue. The program will automatically search for the
camera in the intranet.
NOTE - Check "Skip the hardware installation guide" to skip checking
the hardware connection. To check the hardware installation settings,
do not check the option box.
19
If Complete