Omron S8FS-G Series Manual page 14

S8FS-G
Construction and Nomenclature
Nomenclature
S8FS-G015@@@
S8FS-G030@@@
S8FS-G050@@@
(6)
(4)
(9)
No. Terminal name
(1) L
(2) N
(3) PE
(4) +V1
(5) +V2
(6) -V1
(7) -V2
(8) ---
(9) ---
(10) +RC
(11) -RC
(12) ---
*1. The fuse is located on the (L) side. It is not user-replaceable. For a DC input, connect the positive voltage to the L terminal.
*2. This is the protective earth terminal specified in the safety standards. Always ground this terminal.
14
S8FS-G100@@@
S8FS-G150@@@
(1)
(2)
(3)
(6)
(7)
(4)
(5)
(8)
(9)
S8FS-G@@@24C-R
(6)
(7)
(4)
(5)
(9)
Name
Input terminals
Protective Earth terminal
( )
DC output terminals
Output indicator (DC ON: green)
Output voltage adjuster (V.ADJ)
Remote control terminals
Parallel operation switch
S8FS-G300@@@
S8FS-G600@@@
(1)
(9)
(2)
(4)
(3)
(5)
(6)
(7)
(3)
(8)
(2)
(1)
S8FS-G@@@24C-WR
(12)
(11)
(1)
(10)
(2) (9)
(3)
(4)
(5)
(6)
(7)
(3)
(8)
(2)
(11)
(1)
(10)
Function
Connect the input lines to these terminals. *1
Connect the ground line to this terminal. *2
Connect the load lines to these terminals.
Lights while a direct current (DC) output is ON.
Use to adjust the voltage.
Wire for remote control.
To operate in parallel, set the switch to the "PARALLEL" side.
(8)
(8)