Engineering; Hardware Setup; Wiring The Sinamics G120P - Siemens SINAMICS G120P Manual
Pump control with timer
Hide thumbs
Also See for SINAMICS G120P:
- Operating instructions manual (496 pages) ,
- Instruction manual (100 pages) ,
- Technical manual (98 pages)
Table of Contents
Advertisement
2 Engineering
Engineering
2
2.1
Hardware setup
2.1.1
Wiring the SINAMICS G120P
The modular inverter system SINAMICS G120P consists of the following
components:
•
Control Unit CU230P-2
•
Power Module (PM)
•
Control unit (e.g. a Basic Operator Panel) or dummy cover
The following figure shows the structure of the SINAMICS G120P. A power module
(PM240-2) is used for connection to 400V.
Figure 2-1: Wiring the SINAMICS G120P
L1
L2
L3
N
PE
Note
For guidelines on the design and installation of the SINAMICS G120P drive, refer
to the installation manual:
https://support.industry.siemens.com/cs/ww/en/view/109756015
Pump with SINAMICS G120P
Entry-ID: 109759888,
V1.0.1,
L1 L2 L3
PE
SINAMICS
PM240-2
SINAMICS
CU230P-2
DTC
U2 V2 W2
M
09/2019
3AC 400V
6
Advertisement
Table of Contents
