Grandstream Networks HandyTone HT286 Product Related Questions page 9

Allow Auto Answer by Call-Info
Turn Off speaker on Remote disconnect
For GXP21xx/GXP1450, on the Client side, the following field (Accoung Page) needs to be set
to Yes.
Allow Auto Answer by Call-Info
Note: The PBX Server has to support this feature to make it work.
Q: Is the GXP2020 Expansion Module compatible with the GXP2120/GXP2110 models?
Yes, it is compatible. However, the GXP2120/2110 has a special EXT port on the back which
requires a different extension cable (Included with the GXP2020 Expansion Module).
Q: Why am I getting a strange icon with a down arrow going into a basket [_]?
This symbol is stating that the phone is writing files to the call record detail file. This occurs
when the phone is either idle for 5 minutes or when the call records reach greater than 100 calls.
Q: What configuration changes on the web-gui require a reboot?
Under Basic and Account settings you are not required to reboot the phone. If changes were
made under Advanced settings only the network changes require a reboot. The following
parameters do not require a reboot:
Admin Password
STUN Server
Phonebook XML Download
Offhook Auto Dial
Call Progress Tones
Custom ring tone 1 - 3, used if incoming caller ID is set
Intercom User ID
Disable Call-Waiting
Disable Call-Waiting Tone
Disable Direct IP Calls
Use Quick IP-call mode
Disable Conference
Enable MPK sending DTMF
Disable Transfer
Auto Attended Transfer
Display Language