Grandstream Networks HandyTone HT286 Product Related Questions page 7

Alert-Info:;info=priority
Q: Does the BudgeTone support Syslog Server setting?
Yes, under Advanced Settings page, you will see Syslog Server and Syslog Level fields to setup
Syslog message retrieval. Syslog messages are very helpful in debugging any errors with the
device.
Q: Where do I view my Call History ex. Missed/Incoming/Outgoing Calls?
You can check Received/Missed Calls along with Outgoing calls made, on the Phone by
unhooking the receiver and then pressing CALLERS and CALLED resp. For more detailed Call
information you can log onto the web configuration pages, and check the Status page.
Q: How do I make a call using only the IP Address?
BT101 and BT102 models:
1. Off-hook the receiver or press speakerphone.
2. Press the MENU button
3. Now dial the IP Address in 12 digit format ex.192168001029
4. Press SEND.
BT200:
This model has the ability to dial an IP address under the same LAN segment by simply pressing
the last octet in the IP address.
In the Advanced Settings page there is an option "Use Quick IP-call mode", by default it is set to
No. When this option is set to YES, and #XXX is dialed, where X is 0-9 and XXX <=255, phone
will make direct IP call to aaa.bbb.ccc.XXX where aaa.bbb.ccc comes from the local IP address
REGARDLESS of subnet mask.
#XX or #X are also valid so leading 0 is not required (but OK).
For example:
192.168.0.2 calling 192.168.0.3 just dial #3 follow by SEND or #
192.168.0.2 calling 192.168.0.23 just dial #23 follow by SEND or #
192.168.0.2 calling 192.168.0.123 just dial #123 follow by SEND or #
192.168.0.2 dial #3 and #03 and #003 has same effect --> call 192.168.0.3