Grandstream Networks HandyTone HT286 Product Related Questions page 4

Q: How do I ensure my 911 calls are directed over the PSTN network and implement a dial
plan for specific area codes without dialing a (1) prefix?
Create the following string under Dial Plan Configuration option under FXS PORT configuration
page:
{L: 404x+| L:770x+ | L:678x+| L:911 | x+}
Please note that only HT503 supports this feature.
Q: What is the led pattern of a HT502/503?

Power led ON indicates power is connected

WAN led ON indicates port activity

LAN led ON indicates PC (or LAN) port activity

Phone1/2 or Line led indicates status of the respective FXS port or FXO in case of
HT503. ON is Busy, OFF is available and slow blinking there is a voice mail for that
port.
Slow blinking of WAN and LAN together means the product's firmware is in upgrading or
provisioning state.
BudgeTone Series FAQs
Q: What are the differences between BudgeTone-101, 102 and 200 models?
The BT model 101 (also called BT100) and 102 have the same software functions and the only
difference is that model 101 has one Ethernet interface and model 102 has two Ethernet
interfaces i.e. the PC port (to be connected to your computer) and normal LAN port (to be
connected to your Internet Source.). These 2 ports are bridged together similar to a HUB. BT-
200 is higher end version with Router feature and capable of supporting 100Mbps connections.
BudgeTone Model BT101
LAN Interface
Bandwidth
Router Feature
Q: What Codecs are supported by BudgeTone Series Phones?
BudgeTone Phones support a wide range of Codecs:
BT101 and BT102 support:
BT102
1 x RJ45 2 x RJ45
10Mbps 10Mbps
No No
BT200
2 x RJ45
10/100Mbps
Yes