Grandstream Networks HandyTone HT286 Product Related Questions page 11

Yes, any text entered on the 'Name' field along with the 'User ID' will be displayed on the LCD
in Bold (for Account 1 only). Under Basic Settings, field 'Display Clock instead of Date' should
be set to No.
Q: Can I enable/disable recording of missed calls?
Yes, on each Account Page, there is a field for 'Disabling Missed Calls'. If set to Yes, 'Missed
Calls' for that Account will not be recorded anymore.
Q: Does the GXP2000 have 'intuitive dialing' and call log for previously dialed and
received calls?
The GXP2000 has a call log with only last 20 records stored and will be reset once the phone
reboots. Just off hook and press the left and right arrow key you should see that. There is no
intuitive dialing yet but we hope to implement address book function in the new firmware
release.
Q: How do I use the paging or intercom feature on the GXP2000?
On the Client side, the following two fields (Account Page) need to be set to Yes.
Allow Auto Answer by Call-Info
Turn Off speaker on Remote disconnect
Note: The PBX Server has to support this feature to make it work.
Q: How do I make a call using the IP Address only?
This phone has the ability to dial an IP address under the same LAN segment by simply pressing
the last octet in the IP address.
In the Advanced Settings page there is an option "Use Quick IP-call mode", by default it is set to
No. When this option is set to YES, and #XXX is dialed, where X is 0-9 and XXX <=255, phone
will make direct IP call to aaa.bbb.ccc.XXX where aaa.bbb.ccc comes from the local IP address
REGARDLESS of subnet mask.
#XX or #X are also valid so leading 0 is not required (but OK).
For Example:
192.168.0.2 calling 192.168.0.3 just dial #3 follow by SEND or #
192.168.0.2 calling 192.168.0.23 just dial #23 follow by SEND or #