Ice Maker Care; Exterior Surfaces; Ice Maker System; Condenser - Kenmore 106.89592100 Technical Education

Ice Production
PROBLEM
Ice Maker Runs But Produces
No Ice
INSTALLATION ANd OperATINg INSTrucTIONS
I
I
I
Electrical Shock Hazard Electrical Shock Hazard
Disconnect power before servicing.
Disconnect power before cleaning.
Replace all parts and panels before operating. Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Failure to do so can result in death or electrical shock.
RECOMMENDED SOLUTIONS
Check that the control is turned on.
Check that the water supply is properly connected and turned on.
If the drain cap is loose, water will empty from the water pan, and you will have ei
WARNING
WARNING
A
B
n
2-17