Download Print this page

Removing The Crispers And Crisper Cover; Adjusting The Crisper Humidity Control; Removing The Meat Drawer And Cover - Whirlpool ED22DK Use & Care Manual

No-frost refrigerator-freezers
Hide thumbs

Advertisement

Pull out to the stop,
lift the front
and pull again.
Removing
the crisper
and crisper
cover
To remove the crispers:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove full-width crisper.
2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator.
2. Lower into place.
3. Replace full-width crisper.
NOTE: Glass cover will fit above full-width crisper
only. Crisper(s) must be removed before remov-
ing cover.
Lift the cover
fror it, then
the back.
Pull out to the stop,
lift the front and
pull again.
Adjusting
the crisper
humidity
control
You can control the amount of humidify in the
moisture-sealed
crispers.
The control can be adjusted to any setting
between LOW and HIGH.
LOW (open) lets moist air out of the crisper for
best storage of fruits and vegetables
with
skins.
HIGH (closed) keeps moist air in the crisper
for best storage of fresh, leafy vegetables.
Removing
the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer and crispers.
2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator.
2. Lower into place.
3. Replace meat drawer and crispers.
7

Hide quick links:

Advertisement

loading

  Also See for Whirlpool ED22DK

  Related Manuals for Whirlpool ED22DK

This manual is also suitable for:

Ed22rkEt18nk