Do you have a question about the ET18PK and is the answer not in the manual?
Questions and answers
David Satterthwaite
April 1, 2025
Water is dripping from back of the freezer into the back of the refrigerator. How do I stop it. Freezer seems to cool OK
1 comments:
Mr. Anderson
April 1, 2025
To stop water from dripping from the back of the freezer to the back of the refrigerator in a Whirlpool ET18PK, check the following:
1. Ensure the refrigerator and freezer are not set colder than necessary, as excessive frost can block the defrost drain. 2. Make sure the door gaskets seal tightly and the cabinet is level to prevent warm air from entering and causing excess condensation. 3. Clean the condenser coil regularly to maintain proper cooling function. 4. If moisture forms on the exterior, use the Exterior Moisture Control in the ON setting.
These steps help reduce excess moisture and maintain proper drainage.
Need help?
Do you have a question about the ET18PK and is the answer not in the manual?
Questions and answers
Water is dripping from back of the freezer into the back of the refrigerator. How do I stop it. Freezer seems to cool OK
To stop water from dripping from the back of the freezer to the back of the refrigerator in a Whirlpool ET18PK, check the following:
1. Ensure the refrigerator and freezer are not set colder than necessary, as excessive frost can block the defrost drain.
2. Make sure the door gaskets seal tightly and the cabinet is level to prevent warm air from entering and causing excess condensation.
3. Clean the condenser coil regularly to maintain proper cooling function.
4. If moisture forms on the exterior, use the Exterior Moisture Control in the ON setting.
These steps help reduce excess moisture and maintain proper drainage.
This answer is automatically generated