INSTALLER SECTION
3. TECHNICAL DATA AND USEFUL INFORMATION ON PUMPS
3.1
When the dishwasher has not been used for some time, check that the washing pump turns
freely.
To do this, operate using a screwdriver in the special slot on the ventilating side of the motor
shaft.
In case of blocking, turn the main switch off and move the motor shaft, inserting the screwdri-
ver in the notch, turning it clockwise and anticlockwise.
3.2
When installing, pay particular attention to the positioning of the drain pipe (see image 7).
See paragraph 5.4. for operation description.
IMPORTANT
3.3
After a period of inactivity of the machine, check if the rinse booster pump rotates freely.
image 7
To do that, use a screwdriver in the slot on the fan side of the motor shaft (see image 8) to
release.
Washing pump
Draining pump (optional)
Booster pump (optional)
CAUTION: INCORRECT
POSITIONING OF THE TUBE.
CAUTION: CORRECT
POSITIONING OF THE TUBE
image 8
EN
page 29