Table of Contents
Advertisement
EN
3. TECHNICAL DATA AND USEFUL INFORMATION ON PUMPS
3.1 Washing pump
When the dishwasher has not been used for some time, check that the washing pump turns freely.
To do this, operate using a screwdriver in the special slot on the ventilating side of the motor shaft.
In case of blocking, turn the main switch off and move the motor shaft, inserting the screwdriver in the notch, turning it
clockwise and anticlockwise.
3.2 Emptying pump (optional)
How installing, pay particular attention to the position of the emptying tube (see pict. 6).
See paragraph
5.4
for operations description.
pict. 6
3.3 Pressure increasing pump (optional)
When the dishwasher has not been used for some time, check that the supplementary pressure increasing pump turns freely.
To do this, operate using a screwdriver in the special slot on the ventilating side of the motor shaft (see pict. 7).
In case of blocking, turn the main switch off and move the motor shaft, inserting the screwdriver in the notch, turning it
clockwise and anticlockwise.
pict. 7
page 28
INSTALLER SECTION
CAUTION: INCORRECT
POSITIONING OF THE TUBE.
CAUTION: CORRECT
POSITIONING OF THE TUBE
Advertisement
Table of Contents
