Cabling Requirements - Sun Microsystems Sun StorEdge 3900 Series Site Preparation Manual

Table of Contents

Advertisement

Cabling Requirements

This section contains the cabling requirements for the Sun StorEdge 3900 and 6900
series systems. When cabling the system, make sure you:
Keep power and interface cables clear of foot traffic. Route cables inside walls,
under the floor, through the ceiling, or in protective channels or raceways. Route
interface cables (excluding fiber-optic cables) away from motors and other sources
of magnetic or radio frequency interference.
Do not exceed cable length limitations. See
lengths.
TABLE 6
Cable Type
Shielded Ethernet,
10/100BASE-T, category 5
Serial
(Available only to qualified
field service representatives.)
Power (220V)
The power cables are the standard ones shipped with the Sun StorEdge Expansion
Cabinet. The cables that connect the two cabinets together are standard Fibre
Channel cables.
8
Sun StorEdge 3900 and 6900 Series Site Preparation Guide • February 2002
Cable Specifications
TABLE 6
Connector
RJ-45
RJ-45
Standard
for cable specifications and
Maximum Length
328.084 feet (100 m)
82.021 ft. (25 m)
n/a

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sun storedge 6900 series

Table of Contents