Sony CBK-WA100 Setup Manual page 22

3 Enter the SSID and key (password) of the connected Wi-Fi router, and configure the following settings.
• Set whether the IP address is set by DHCP or manually
• Set whether DNS is set automatically or manually
Note
Wireless LAN networks without password protection are not supported due to security concerns.
Network environments with access authentication, such as a hotel network, are not supported.
4 When finished configuring items, press [Submit] to register the SSID.
5
Set the wireless mode switch to the ST position, and connect to the access point of the registered SSID
in station mode.
During the connection procedure, the Status LED flashes green slowly. When the connection is
successful, the Status LED lights up green and the ST LED lights up blue.
If the connection with the mobile device is lost, connect the mobile device to the network of the
registered SSID. Check the IP address of the CBK-WA100/101 on the configuration screen for the access
point to connect to.
You can connect to the CBK-WA100/101 easily using the Content Browser Mobile application.
When the connection is successful, the Wi-Fi mode status indicator appears.
If you experience any difficulty, see
"12.1.2. Wireless LAN"
22
in the Troubleshooting section.