Streaming Test - Sony CBK-WA100 Setup Manual

Note
If Proxy Recording > Size is set to "HD/SD Auto (9M/6Mbps)", proxy recording cannot be started after the
Network Client Mode setting is set to On.

6.2. Streaming Test

After checking that Network Client Mode communication is successful, you can check QoS streaming.
This test is controlled from the CCM UI.
1 Select the camcorder and set the Network Range and destination receiver (Network RX Station).
2
Issue the Start command for QoS streaming from the CCM.
The camcorder starts streaming.
When streaming is successful, the STRM icon appears on the camcorder LCD screen and the streaming
picture appears in the CCM UI preview area.
If you experience any difficulty, see
"12.3.1. Live Streaming"
35
in the Troubleshooting section.