Network Client Mode (Ncm) - Sony CBK-WA100 Setup Manual

3.2. Network Client Mode (NCM)

Check the XDCAM air or Network RX Station settings information before configuring the camcorder's
network client mode settings.
The following information is required.
• URL or IP address for Connection Control Manager (CCM)
• Port to use
• User name
• Password
The following operations can also be configured.
• Streaming and proxy recording simultaneously
Network Client Mode can be registered in Preset 1 to 3, and the name to be displayed for each preset can
be set.
You can also change the name from the preset number (for example, "MyCCM").
14