Networks Combinations - Sony CBK-WA100 Setup Manual

5.3.4. Networks Combinations

You can connect to several networks simultaneously using the CBK-DL1.
Note
4G/LTE and wired LAN cannot be used simultaneously. Only 4G/LTE is used.
Two wireless LAN devices cannot be used simultaneously.
Table 7. Network Combinations
Connect to Connect to USB (Host) 2
USB (Host) 1
USB Wireless None
LAN Module
CBK-NA1R
3G/4G/LTE USB Modem
USB Wireless CBK-DL1 CBK-NA1R
LAN Module
None
5.3.4.1. IP address conflicts
IP address conflicts may occur depending on the network combination.
For example, the following two networks result in connections to the same segment (192.168.10.xxx).
• Wireless LAN device connects in station mode via a wireless LAN router, IP address is 192.168.10.1 with
subnet mask of 255.255.255.0
• Wired LAN connects with network, IP address is 192.168.10.100 with subnet mask of 255.255.255.0
IP address conflicts may occur under the following network combinations.
• Wireless LAN + Wired LAN
• Wireless LAN + 4G/LTE (Ethernet type)
• 4G/LTE (Ethernet type) + 4G/LTE (Ethernet type)
Note
If this issue occurs in Wi-Fi Access Point mode, the IP address will change from 192.168.1.1 to 10.0.0.1.
None
3G/4G/LTE USB None
Modem
3G/4G/LTE USB 3G/4G/LTE USB
Modem Modem
USB Wireless LAN CBK-NA1R
Module
USB Wireless LAN 3G/4G/LTE USB
Module Modem
3G/4G/LTE USB 3G/4G/LTE USB
Modem Modem
Comments
Wireless LAN can be used.
Wireless LAN and wired LAN can be used.
Wireless LAN and 4G/LTE can be used.
Wireless LAN and wired LAN can be used.
Wireless LAN and 4G/LTE can be used.
Wireless LAN, 4G/LTE, and 4G/LTE can be used.
Wireless LAN and wired LAN can be used.
Wireless LAN and 4G/LTE can be used.
4G/LTE and 4G/LTE can be used.
"NCM Auto Start" must be set to On (see
Network Client Mode Settings"
26
"5.4.
).