Table of Contents
Advertisement
Adjusting
the oven temperature
control
Although your new oven is properly adjusted
to provide accurate temperatures,
it may
cook faster or slower than your old oven.
If, after using the oven for a period of
time, you are not satisfied with the baking/
roasting results, you can change the
temperature calibration by following
these steps:
1. Make sure the Oven Temperature
Control Knob is turned to the off position.
Pull knob straight off and flip it over.
Notches
\
Tooth
/
Loiking
screws
3. To lower the temperature,
hold knob
handle firmly and move the tooth a notch
counterclockwise.
Each notch equals
about 5°F (2.5%).
4. To raise the temperature,
hold knob
handle firmly and move the tooth a notch
clockwise. Each notch equals about
5°F (2.5%).
5. Tighten
the locking screws and replace
the control knob.
NOTE: DO NOT measure oven temperature
with a thermometer.
Opening the oven door
will lower the oven temperature
and give you
an inaccurate reading. Also, the thermom-
eter temperature
reading will change as your
oven cycles.
2. Loosen the locking screws inside the
control knob. Note the position
of
the notches.
14
Advertisement
Table of Contents
