Adjusting The Oven Temperature Control - Whirlpool RM988PXV Use & Care Manual

Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature of
your old oven may have shifted gradually without you noticing the change.
Your new oven is properly adjusted to provide accurate temperatures. But
when comparing to your old oven, the new design may give you difficult
results.
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they can be adjusted by following these steps:
1.
Pull the Oven Temperature Control
Knob straight off.
3.
To lower fhe temperature,
move
the tooth a notch closer to LO.
Each notch equals about 10°F
(5°C).
2. Loosen the locking screw inside
the control knob. Note the
posi-
ffon of fhe notches.
4.
To raise fhe temperature,
move
the tooth a notch closer to HI. Each
notch equals about 10°F (5°C).
Tighten fhe locking screw and
replace the control knob.
10