Adjusting The Oven Temperature Control - Whirlpool RF366PXY Use And Care Manual

Adjusting the oven temperature control
Oven temperature controls will gradually
shift after years of use. So, even though
your new oven is properly adjusted to
provide accurate temperatures, it may cook
faster or slower than your old oven.
If, after using the oven for a period of time,
you are not satisfied with the temperature
settings, you can change them by following
these steps:
1. Turn the Oven Temperature Control
Knob to the off position. Pull knob
straight off and flip it over.
2.
Loosen the locking screws inside the
control knob. Note the position of the
notches.
3. To lower the temperature, hold knob
handle firmly and move the tooth a notch
counterclockwise. Each notch equals
about 5°F (2.5%).
4. To raise the temperature, hold knob
handle firmly and move the tooth a notch
clockwise. Each notch equals about 5°F
(2.5%).
Tighten the locking screws and replace
the control knob.
13