Advertisement
STANDARD SPECIFICATIONS
Single-phase 200V series
Type
Jaguar CUB CM
Nominal applied motor
Output Rated capacity *1)
ratings Rated voltage *2)
Rated current *3)
Overload capability
Output frequency
Phases, Voltage, Frequency
Input
ratings Voltage/frequency variations
Momentar y voltage dip
capability
Rated
(with DCR)
current *4)
(without DCR)
Required power
supply capacity *5)
Braking Torque (standard) *6)
DC injection braking
Enclosure (IEC 60529)
Cooling method
Standards
Mass
*1) Inverter output capacity (kVA) at 220V. *2) Output voltage is proportional to the power supply voltage and cannot exceed the power supply voltage. *3) Current derating may be required in
case of low impedance loads such as high frequency motor. *4) This value is calculated using IMO calculation method. (Refer to Technical Information). *5) When a power-factor correcting DC
REACTOR is used. *6) With a nominal applied motor, this value is average torque when the motor decelerates and stops from 60Hz. (It may change according to motor loss).
Torque characteristics
200V/50Hz
150
120
100
80
65
50
5
–
kW
–
kVA
V
3-phase, 200V/50Hz; 200, 220, 230V/60Hz
A
–
150% or rated current for 1 minute
Hz
0.1 – 120
l-phase, 200 to 240V, 50/60Hz
• Voltage: +10 to -10%
• Frequency: +5 to -5%
When the input voltage is 165V or more, the inverter can be operated continuously
When the input voltage drops below 165V from rated voltage, the inverter can be operated for 15ms
(less than 85% load of nominal applied motors)
–
–
–
kVA
150%
• Starting frequency: 3.0Hz (Fixed)
• UL/cUL, Low Voltage Directive, EMC Directive
• IEC 61800-2 (Rating, specifications for low voltage adjustable frequency a.c. power drive systems)
• IEC 61800-3 (EMC product standard including specific test methods)
kg
–
Short time operation torque
(high torque boost)
0 3
20
50
Output frequency [Hz]
0.2
0.4
0.2
0.4
0.53
0.95
1.4
2.5
2.0
3.5
3.9
6.4
0.4
0.7
100%
• Braking time: 0.0 to 30.0s
• Braking level: 0 to 100% of rated current
IP 20
Natural cooling
0.6
0.7
100% of output torque refers to
the rated torque of the motor
driver at 50Hz.
Continuous operation torque
100
0.75
1.5
0.75
1.5
1.5
2.6
4.0
7.0
6.5
11.8
11.4
19.8
1.3
2.4
50%
Fan cooling
0.9
1.6
2.2
2.2
3.8
10.0
17.7
28.5
3.6
30%
2.2
Advertisement
