Advertisement
IMO Jaguar Drives
5 Year Warranty
IMO JAGUAR drives are covered by a unique 5
year warranty against failure arising as a result of
inferior material or workmanship.
In the event of a unit failing within 5 years
despatch from IMO, we will repair or replace the
drive free of charge.
Whenever possible, in the interest of providing
the fastest service to our customers, we will
replace the failed drive with a new or service
exchange unit at IMO's discretion. This may not
be possible, however, if the failed unit is in poor
condition owing to abuse or neglect. In such
circumstances, the customer may elect to have
the unit repaired within the warranty if viable, but
physical refurbishment will be chargeable.
IMO will, upon request, provide a service
exchange unit in advance of receipt of the failed
unit if an order number is provided along with
details of the failed unit. Replacements will be
dispatched at IMO's cost and credit will be issued
upon receipt of the failed unit in good physical
condition. Full credit will not be given if in IMO's
judgment the unit has been physically or
electrically abused. A no-fault-found charge will be
levied upon units returned and found not to be
faulty.
The terms of warranty do not provide for on-site
service although a service engineer will be
provided upon receipt of an order. IMO may elect
to waive any charge should the findings on site
indicate that any problem found lies within the
scope of the warranty.
IMO Precision Controls Limited
Technical Helpline
Tel 00 44 (0) 20 8452 6444
8am to 6pm UK time Monday to Friday
Full product technical manuals available on our
website: www.imopc.com
IMO Precision Controls Limited
is a registered ISO 9002 company.
Copyright. All rights reserved. No part of this publication may br reproduced or transmitted in any form or by any means, electronic or
mechanical including photocopying, recording, or by any information storage or retrieval system without the prior written permission of
IMO Precision Controls Ltd. © IMO Precision Controls Ltd 2000
Part number CUBCAT. Ref SWK 20/220. Issue 1 March 2000
JAGUAR CUB CM
Safety Precautions
Safety at Work
It is the responsibility of the owner, installer and
user to ensure that the installation of the
equipment and the way in which it is operated and
maintained complies with the requirements of the
Health & Safety at Work Act in the United
Kingdom and other applicable legislation,
regulations and codes of practice in the UK or
elsewhere.
Only qualified personnel should install this
equipment, after first reading and understanding
the information in this publication. The
installation instructions should be adhered to. Any
question or doubt should be referred to IMO
Precision Controls Ltd.
Operational Safety
Users and operators of the equipment must take
all necessary precautions to prevent damage to
equipment and especially to prevent the risk of
injury to personnel working on or near the motor
and the driven equipment.
The stop and start inputs should not be relied upon
alone to ensure the safety of personnel. If a safety
hazard could arise from the expected starting of the
motor, an interlock mechanism should be provided to
prevent the motor from running except when it is
safe for it to do so.
Documentation
Every effort has been made by IMO Precision
Controls Ltd to ensure that this document
accurately and completely represents the Jaguar
CUB CM range of inverters at the time of going
to press. Information with respect to installation is
necessarily generalised, and the supplier accepts
no liability for contingencies over which he has no
control in respect of the selection, installation
and/or operation of equipment.
In line with IMO's policy of continuous
improvement, the contents of this document are
subject to change without prior notice.
18
Advertisement
