Jura IMPRESSA X5 Getting Started

Hide thumbs Also See for IMPRESSA X5:

Download this manual

Cleaning the One Touch Cappuccino-Frother

In addition to using the cappuccino cleaning system, you should

also remove the One Touch Cappuccino-Frother regularly and rinse

it under running water.

Remove the One Touch Cappuccino-Frother from the

IMPRESSA X5

Dismantle frother

Rinse all parts of the frother under running water

Reassemble the frother and reattach to machine

Coffee in its most perfect

form – IMPRESSA X5

Getting started

Need help?

Do you have a question about the IMPRESSA X5 and is the answer not in the manual?

Page 1 Remove the One Touch Cappuccino-Frother from the IMPRESSA X5 Dismantle frother Rinse all parts of the frother under running water Reassemble the frother and reattach to machine Coffee in its most perfect form – IMPRESSA X5 Getting started...
Page 2 Using the machine for the first time Inserting the filter (when using machine for first time) Switch on mains switch Press Rotary Switch until appears FILTER NO Press operating button Press Rotary Switch again to enter this point of the program Fill water tank Turn Rotary Switch until FILTER YES...
Page 3 TRAY / GROUNDS EMPTY Open cover to filler funnel for pre-ground coffee powder Empty drip tray and coffee grounds container and reinsert Drop in JURA cleaning tablet and close cover Display text: WATER TANK / FILL Rinse water tank thoroughly, fill will fresh, cold tap water and...
Page 4 Changing the filter Cleaning the cappuccino system After 50 litres of water or every two months, the filter is no longer If you make cappuccino or heat milk, you should clean the effective. A reminder to change the filter appears on the display. cappuccino system daily.