S Etting The Controls - Whirlpool SF385PEE Use & Care Manual

USING THE SELF-CLEANING CYCLE
S
ETTING THE CONTROLS
NOTE: Make sure the clock is set to the correct
time of day. (See "Setting the clock" in the "Using
Your Range" section.
1.
Press the auto clean pad.
This will automatically set a 3
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1 ⁄ hour before the cycle is over.
2
2.
Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3 1 ⁄
2
pads to set the cleaning time you want. Press
the "up" (s) or "down" (t) pad(s) until a time
between 2 1 ⁄ -4 1 ⁄
2 2
•
Use 2 1 ⁄ hours for light soil.
2
•
Use 3 1 ⁄ -4 1 ⁄ hours for average to heavy soil.
2 2
3.
Start the oven.
The door will lock as soon as you press the
start/enter pad.
4.
After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
LOCK'D goes off and the door unlocks.
5.
After the oven cools to room temperature, wipe
24
1
⁄ -hour
2
hours, use the hour and minute
hours shows on the display.
off any residue or ash
with a damp cloth or
sponge. If needed,
touch up spots with a
mildly abrasive cleanser
or cleaning sponge.
PRESS YOU SEE
AUTO
CLEAN
PRESS YOU SEE
HR MIN
(example shows 4
cleaning time)
PRESS YOU SEE
START
ENTER
HEAT
5 SEC
YOU SEE
CLEAN TIME
CLEAN TIME
1 ⁄ -hour
2
ON
LOCK'D CLEAN TIME
CLEAN