Table of Contents
Advertisement
S
ETTING THE CONTROLS
1.
Set the oven control knob to CLEAN.
The door will lock itself within 6 seconds. If the
door has a problem locking, it will try to lock
itself for 1 minute. If the door fails to lock, the
Self-Cleaning cycle will cancel. An error code
will be displayed.
NOTE: Do not attempt to open the door while in
the locking mode.
2.
Set the cleaning time (optional).
Press the "up" (s) or "down" (t) pad(s) to
select a clean time between 2 hours, 30
minutes and 4 hours, 30 minutes.
NOTE: The Self-Cleaning cycle will
automatically set a 3
different time is selected.
3.
During the last 30 minutes of the Self-Cleaning
cycle the oven will start to cool down.
Once the oven goes below the locked
temperature:
4.
Turn the oven control knob to OFF.
5.
After the oven is cool, wipe off any residue or
ash with a damp cloth or sponge.
If needed, touch up spots with a mild abrasive
cleanser or cleaning sponge.
1
⁄
hour cycle unless a
2
PUSH AND TURN
WARM
BROIL
200
CLEAN
250
300
350
500
400
450
PRESS
TURN
WARM
BROIL
200
CLEAN
250
300
350
500
400
450
USING THE SELF-CLEANING CYCLE
YOU SEE
OVEN ON light goes
on. DOOR LOCKED/
CLEANING light
flashes until you
close door, then is
solid. HEATING light
goes on when oven
starts heating.
YOU SEE
OVEN ON and DOOR
LOCKED/CLEANING
lights are on. HEATING
light goes off and COOL
appears in display.
YOU SEE
OVEN ON light flashes.
DOOR LOCKED/
CLEANING light goes
out when door unlocks.
YOU SEE
OVEN ON light
goes out and time
of day appears in
display.
continued on next page
19
Advertisement
Table of Contents
