Adjusting The Oven Temperature Control - Whirlpool SF375PEW Use And Care Manual

Using Your Range
Continued
Adjusting the oven temperature
control
Does your oven seem hotter or colder
than your old oven? The temperature of
your old oven may have shifted
gradually without you noticing the
change. Your new oven is properly
adjusted to provide accurate tempera-
tures. But, when compared to your old
oven, the new design may give you
different results.
If, after using the oven for a period of
time, you are not satisfied with the
temperature settings, they can be
adjusted by following these steps:
1.
Pull the Oven Temperature Control
Knob straight off.
2.
Loosen both locking screws.
Note
the position of the indicator below
the bottom screw.
3. To lower the temperature,
turn skirt
counterclockwise to move indicator
one degree marker to the right. Each
degree marker equals about
10°F (5°C).
4. To raise the temperature,
turn skirt
clockwise to move indicator one
degree marker to the left. Each
degree marker equals about
10°F (5°C).
Tighten the locking screws and
replace the control knob.
10