Removable Towing Hook - Hyundai Accent 2020 Manual

HCa CAN-E 6.qxp 5/27/2019
What to do in an emergency
WARNING
If your vehicle is equipped with
a rollover sensor, place the igni-
tion switch in the LOCK/OFF or
ACC position when the vehicle
is being towed. The side impact
and curtain air bag may deploy
if the sensor detects the situa-
tion as a rollover.
When towing your vehicle in an
emergency without wheel dollies:
1. Place the ignition switch in the
ACC position.
2. Place the shift lever in N (Neutral).
3. Release the parking brake.
CAUTION
Failure to place the shift lever in
N (Neutral) when being towed
with the front wheels on the
ground can cause internal dam-
age to the transmission.
6-16
3:08 PM Page 16

Removable Towing Hook

1. Open the tailgate, and remove the
towing hook from the tool case.
2. Remove the hole cover pressing
OYC066013
the lower part of the cover on the
front or rear bumper.
3. Install the towing hook by turning it
clockwise into the hole until it is
fully secured.
4. Remove the towing hook and
install the cover after use.
OHCR066018