Hyundai Accent 2020 Manual page 282

HCa CAN-E 5.QXP 5/27/2019
• The vehicle drives through a con-
struction area, on an unpaved
road, or above metal materials,
such as a railway
• The vehicle drives inside a build-
ing, such as a basement parking
lot
• The adverse road conditions cause
excessive vehicle vibrations while
driving
• The vehicle in front is moving verti-
cally to the driving direction
• The vehicle in front is stopped ver-
tically
• The vehicle in front is driving
towards your vehicle or reversing
• The sensor recognition changes
suddenly when passing over a
speed bump
• The vehicle is under heavy vibra-
tion
• The vehicle is on roundabouts
• The radar or sensor cover is bro-
ken
• The vehicle is passing a tunnel, toll
gate or partially paved road
• The radar or camera sensor recog-
nition is under other limited circum-
stances
2:47 PM Page 43
- Driving on a curve
The performance of the FCA system
may be limited when driving on a
curved road.
In certain instances on a curved
road, the FCA system may activate
prematurely.
Also, in certain instances the front
radar sensor recognition system may
not detect the vehicle traveling on a
curved road.
In these cases, the driver must main-
tain a safe braking distance, and if
necessary, depress the brake pedal
to reduce your driving speed in order
to maintain a safe distance.
OTM058117
The FCA system may recognize a
vehicle in the next lane when driving
on a curved road.
In this case, the system may unnec-
essarily alarm the driver and apply
the brake.
Always pay attention to road and
driving conditions, while driving. If
necessary, depress the brake pedal
to reduce your driving speed in order
to maintain a safe distance.
Also, when necessary depress the
accelerator pedal to prevent the sys-
tem from unnecessarily decelerating
your vehicle.
Check the surrounding traffic condi-
tions before use
OTM058073
5
5-43