Hyundai Accent 2020 Manual page 286

HCa CAN-E 5.QXP 5/27/2019
i
Information
• During normal cruise control opera-
tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will ener-
gize after approximately 3 seconds.
This delay is normal.
• Before activating the cruise control
function, the system will check to
verify that the brake switch is oper-
ating normally. Depress the brake
pedal at least once after turning ON
the ignition or starting the engine.
2:47 PM Page 47
To set Cruise Control speed
1. Press the CRUISE button on the
steering wheel to turn the system
on. The cruise indicator will illumi-
nate.
2. Accelerate to the desired speed,
which must be more than 30 km/h
(20 mph).
i
Information
For manual transmission vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.
3. Push the toggle switch down
OHCA057023
(SET-), and release it. The SET
indicator light will illuminate.
4. Release the accelerator pedal.
i
Information
On a steep slope, the vehicle may
slightly slow down or speed up, while
driving uphill or downhill.
- Manual trans-
mission
OHCM057024
5
5-47