System Operation - Hyundai Accent 2020 Manual

HCa CAN-E 3b (79~).qxp 5/27/2019
Fan speed control
Turn the knob to the right to increase
the fan speed and airflow. Turn the
knob to the left to decrease fan
speed and airflow.
Setting the fan speed control knob to
the "0" position turns off the fan.
NOTICE
Operating the fan speed when the
ignition switch is in the ON posi-
tion could cause the battery to
discharge. Operate the fan speed
when the engine is running.
2:22 PM Page 97
Air conditioning (if equipped)
OHCA047379
Push the A/C button to turn the sys-
tem on (indicator light will illuminate)
and off.

System Operation

Ventilation
1. Select the Face Level
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
Heating
OHCA047380
1. Select the Floor Level
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
5. If dehumidified heating is desired,
turn the air conditioning system on.
If the windshield fogs up, select the
Floor & Defrost
the Front Defrost
mode.
3
mode.
mode or press
mode.
3-97