Selecting A Child Restraint System (Crs) - Hyundai Accent 2020 Manual

HCa CAN-E 2.QXP 5/27/2019
Safety system of your vehicle
(Continued)
•
Always follow
restraint system manufactur-
er's instructions for installa-
tion and use.
•
Always properly restrain your
child in the child restraint.
•
If the vehicle head restraint
prevents proper installation of
a child seat (as described in
the child restraint system
manual), the head restraint of
the respective seating posi-
tion shall be readjusted or
entirely removed.
•
Do not use an infant carrier or
a child safety
"hooks" over a seatback, it
may not provide adequate
protection in an accident.
•
After an accident, have a
HYUNDAI dealer check the
child restraint system, seat
belts, tether anchors and
lower anchors.
2-30
2:05 PM Page 30
Selecting a Child Restraint
System (CRS)
the child
When selecting a CRS for your child,
always:
• Make sure the CRS has a label
certifying that it meets applicable
Safety Standards of your country.
• Select a child restraint based on
your child's height and weight. The
required label or the instructions
for use typically provide this infor-
mation.
• Select a child restraint that fits the
vehicle seating position where it
will be used.
• Read and comply with the warn-
seat that ings and instructions for installation
and use provided with the child
restraint system.
Child restraint system types
There are three main types of child
restraint systems: rear-facing seats,
forward-facing seats, and booster
seats. They are classified according
to the child's age, height and weight.
Rear-facing child seats
WARNING
NEVER install a child or infant
restraint in the front passen-
ger's seat.
Placing a rear-facing child
restraint in the front seat can
result in SERIOUS INJURY or
DEATH if the child restraint is
struck by an inflating air bag.