Hyundai Accent 2020 Manual page 221

Hide thumbs Also See for Accent 2020:
Table of Contents

Advertisement

HCa CAN-E 4.qxp
5/27/2019
(4) Save: Save the selected file(s).
- Select the files you want to save,
and select [Save]. This saves the
selected files to My Music.
- If phone calls are received or
made while saving, saving will be
canceled.
- Up to 6,000 files can be saved.
- The currently playing file on the
USB device cannot be changed
while saving.
- My Music cannot be used while
saving.
- Up to 700 MB can be saved.
• Information: Detailed information
on the currently playing song is dis-
played.
• Sound Settings: Audio sound set-
tings can be changed.
2:35 PM
Page 27
i
Information
- Using the iPod
• To use the audio system's iPod
trol function, use the dedicated
cable provided with your iPod
• Connecting the iPod
during play may result in a loud
noise that lasts about one to two sec-
onds. Connect the iPod
cle after stopping or pausing play.
• Connect the iPod
the ACC ON state to begin charging.
• When connecting the iPod
be sure to fully push the cable into
the port.
• When EQ effects are enabled simul-
taneously on external devices, such
as iPod
®
s and the audio system, the
EQ effects may overlap, causing
sound quality deterioration or dis-
tortion. Deactivate the EQ function
for all external devices, if possible.
• Noise may occur when your iPod
or the AUX port is connected.
Disconnect and store separately
when not in use.
(Continued)
• There may be noise if the audio sys-
®
Devices
tem is used with an iPod
®
con-
external device connected to the
power jack. In these cases, discon-
®
.
nect the iPod
®
to the vehicle
from the power jack.
• Play may be interrupted, or device
malfunctions may occur depending
®
to the vehi-
on the characteristics of your
iPod
®
with the vehicle in
• Play may fail if your iPhone
nected through both Bluetooth
®
cable,
Wireless Technology and USB. In
this case, select Dock connector or
Bluetooth
your iPhone
output settings.
• If your software version does not
support the communication proto-
col or your iPod
due to device failure, anomalies or
defects, iPod
®
• iPod
®
may not be recognized if the battery
is low. Charge sufficiently before use.
(Continued)
®
or AUX
®
or external device
®
®
®
/iPhone
/iPad
.
®
is con-
®
Wireless Technology on
®
to change the sound
®
is not recognized
®
mode cannot be used.
nano (5th generation) devices
(Continued)
4-27
4
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents