Tilt Steering / Telescope Steering - Hyundai Accent 2020 Manual

Hide thumbs Also See for Accent 2020:
Table of Contents

Advertisement

HCa CAN-E 3a (~78).qxp
5/27/2019
Convenient features of your vehicle
i
Information
The following symptoms may occur
during normal vehicle operation:
• The steering effort may be high
immediately after placing the ignition
switch in the ON position.
This happens as the system performs
the MDPS system diagnostics. When
the diagnostics are completed, the
steering wheel will return to its nor-
mal condition.
• A click noise may be heard from the
MDPS relay after the ignition switch
is in the ON or LOCK/OFF position.
• Motor noise may be heard when the
vehicle is at a stop or at a low driving
speed.
• When you operate the steering wheel
in low temperatures, abnormal noise
may occur. If the temperature rises,
the noise will disappear. This is a nor-
mal condition.
3-20
2:12 PM
Page 20
(Continued)
• When an error is detected from the
MDPS, the steering effort assist func-
tion will not be activated in order to
prevent fatal accidents. Instrument
cluster warning lights may be on or
the steering effort may be high. When
the following symptoms occur, imme-
diately drive the vehicle to a safe area
and check it.

Tilt Steering / Telescope Steering

(if equipped)
Adjust the steering wheel so it points
toward your chest, not toward your
face. Make sure you can see the
instrument cluster warning lights and
gauges. After adjusting, push the
steering wheel both up and down to
be certain it is locked in position.
Always adjust the position of the
steering wheel before driving.
(Continued)
NEVER adjust the steering
wheel while driving. This may
cause loss of vehicle control
resulting in an accident.
To change the steering wheel angle
and height:
1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the
3. Pull up the lock-release lever to
i
After adjustment, sometimes the lock
WARNING
release lever may not lock the steering
wheel. It is not a malfunction. This
occurs when two gears are not
engaged correctly. In this case, adjust
the steering wheel again and then lock
the steering wheel.
OHCI047006L
desired angle (2) and distance for-
ward/back (3, if equipped).
lock the steering wheel in place.
Information

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents