Transmitting; Call Function - Uniden UH5040R Owner's Manual

Operation

Transmitting

The UH5040R uses the 80 UHF-CB Channels For
your reference a list of the available channels,
corresponding frequencies and guidelines for
their use and selection is printed on page 20. For
Australia, Channels 05 and 35 are reserved for
Emergency Calls.
Select the desired channel. Press the microphone's PTT
button and speak normally into the microphone. Hold it
approx. 7cm from your mouth. Release the PTT button to
end the transmission and listen for a reply.

Call Function

Press the microphone Call Button. A two second ringing tone will be transmitted. You
may select from 5 types of tones (see p.18).
Current regulations require calling tones to be restricted to one transmission per
minute. If a second transmission is attempted within one minute then an error
tone will sound.
UNIDEN UH5040R
PTT
13
CALL INST
UHF CB Transceiver