Operation
Operating the UH5040R in Duplex Mode
For this example we are adopting CH01 as the channel being used in your area for
repeater use.
Press [DUP] to switch Duplex On. If Duplex is not required - press [DUP] again to
switch Duplex off. Only channels 01-08 and channels 41-48 are available for Duplex.
Check with your local Retailer for information on available
repeaters.
NOTE
Scanning
The UH5040R has a scanning feature that allows you to search for active channels
automatically.
Furthermore, the UH5040R is designed to have two types of scanning; Open Scanning
more effectively. Press [SCAN] and Scanning starts. The SCAN icon appears. The
scan direction can be changed at any time by rotating the channel selector left or right.
UNIDEN UH5040R
UH5040R
UH5040R
15
UHF CB Transceiver