Operation
Operating the UH5040 in Duplex Mode
For this example we are adopting CH01 as the channel being used in
your area for repeater use.
Press [DUP] to switch Duplex On. If Duplex is not required - press
[DUP] again to switch Duplex off. Only channels 01-08 and channels
41-48 are available for Duplex.
Check with your local Retailer for information on available
repeaters.
NOTE
Scanning
The UH5040 has a scanning feature that allows you to search for active
channels automatically.
Furthermore, the UH5040 is designed to have two types of scanning;
Open Scanning (OS) and Group Scanning (GS), to give you fl exibility
and allow you to use the radio more effectively. Press [SCAN] and
Scanning starts. The SCAN icon appears. The scan direction can be
changed at any time by rotating the channel selector left or right.
UNIDEN UH5040
UH5040
UH5040
13
UHF CB Transceiver