Adjusting The Oven Temperature Control - Whirlpool RS386PXE Use And Care Manual

USI NG Y OU R R A NG E

Adjusting the oven temperature control

Although your new oven is properly adjusted
to provide accurate temperatures, it may
cook faster or slower than your old oven.
If, after using the oven for a period of time,
you are not satisfied with the baking/roasting
results, you can change the temperature
calibration by following these steps:
1. Press the Bake pad.
2. Select an oven temperature between
500°F and 550°F.
3. Before BAKE stops flashing, press
and hold the Bake pad for about
4 seconds until the red display changes
to the oven adjustment display.
4. To adjust the temperature, use the
Increase/Decrease pad(s). Press
raise the temperature or
temperature. You can set the temperature
change as much as -35°F cooler or +35°F
hotter.
5. After making the desired adjustment,
press the Off/Cancel pad to enter the
new offset temperature.
16
to
to lower the
BAKE
BAKE
BAKE
OFF
CANCEL