Setting The Controls - Whirlpool RS386PXE Use And Care Manual

USI NG T H E S E L F- C LE A N ING CYCL E

Setting the controls

Make sure the clock is set to the correct time
of day. (See "Setting the clock" on page 13.)
To start the Self-Cleaning
cycle now:
1. Press the Clean pad. The display will
show "----".
2. To set the cleaning time, press the
Increase or Decrease pad until the
desired cleaning time shows on the
display. You can set the cleaning time
anywhere between 2 and 4 hours.
•
Use 2 hours for light soil.
•
Use 3-4 hours for moderate to
heavy soil.
3. Once you have set the cleaning time
ON will appear on the display. The Self-
Cleaning cycle will begin automatically
within a few seconds.
To delay the start of
Self-Cleaning cycle:
1. Press the Clean pad. The display will
show "----".
2. To set the cleaning time, press the
Increase or Decrease pad until the
desired cleaning time shows on the
display. You can set the cleaning time
anywhere between 2 and 4 hours.
•
Use 2 hours for light soil.
•
Use 3-4 hours for moderate to
heavy soil.
26
CLEAN
CLEAN