Advertisement
en
These installation and operating instructions must be followed during
installation and operation. Read them carefully. We recommend that
you keep these instructions where the device is used. Particular
attention must be paid to instructions marked as follows:
Failure to follow these instructions may lead to personal
safety risks.
Failure to follow these instructions may lead to the
$77(17,21
malfunction and possible damage of the device.
1.
Safety instructions
This appliance is not to be used by children or persons
with reduced physical, sensory or mental capabilities, or
persons with a lack of experience or knowledge, unless
suitably supervised or unless provided with suitable
instructions.
Children should be supervised at all times and should
not play with appliance.
The pump must NOT be used with a damaged cord or
enclosure.
Other relevant regulations should also be followed: e.g. accident
prevention regulations or the internal operating and safety instructions
of the system manufacturer.
Failure to follow these instructions can result in the loss of all
entitlements to claim damages.
2.
General Description (figure 5)
E6 PWM circulation pumps are shaftless spherical motor pumps with
energy-efficient, electronically commutated permanent magnet
technology (ECM technology) for use in hot water heating systems,
heat pumps, solar systems, air conditioning systems, closed cooling
circuits and industrial circulation systems.
« Original instructions »
2
Advertisement
