Table of Contents
Advertisement
FILE METADATA DEFINITIONS:
/ (96)
Group size = 1 (transients), set by HDF5 standards
Number of attributes = number of metadata attributes
AcquisitionMode = see chart below for definitions
AcquisitionSoftwareVersion = defined in software
Ambient = Powerline frequency time gates used
AmbientCps = Powerline frequency
AmbientMode = Powerline frequency mode on=1, off=2
Averaged = transients are stacked (averaged), yes=1 no=2
BackgroundAcqReminderInterval = Software time reminder to acquire background
BackgroundOriginalPath = SBG file used to level plotted data in display–
Cart = dimensions of MM2x2 cart, fixed value
Continuous = static (0) or dynamic (1) acquisition
CountsPerMillivolt = measurement scaling factor, fixed at 6.43400,1/milliVolt
Created = date and time created taken from acquisition tablet PC
DayStamp = UTC date taken from computer
DecayTime = receiver and transmitter decay time
DynamicTransmitterDutyCycle = not used in normal acquisition parameters
EquipmentSerialNumber = Instrument serial number set in application.properties file
EquipmentSerialNumberConfirm = yes if operator confirms serial number at prompt,
otherwise no
EquipmentVersion = fixed as METALMAPPER2X2
FinalDecayLevel = Software defined QC value
FiringSequence = ABCD, order that the Tx coils fire
GPS = Height of GPS taken from application.properties file setting, used to display attitude
corrected cart on navigation display and to calculate UTM coordinates from GPS Lat/Lon
46
Advertisement
Table of Contents
Need help?
Do you have a question about the MetalMapper 2x2 and is the answer not in the manual?