Measurement Types; Sample Project File - Geometrics MetalMapper 2x2 Operation Manual

4.6 Measurement Types

Code Measurement type
Static Anomaly
SAM
Measurement
Dynamic Anomaly
DAM
Measurements
Static Background
SBG
Measurement
Static Background
SBR
Reconnaissance
Quality Control (static
SQC
DQC Dynamic QC (IVS line)
SFT Static Function Test
SXM Miscellaneous
DXM Miscellaneous

4.7 Sample Project File

A project file is a .csv file with columns shown below. This will allow the Survey window to
display the measurement locations for static and dynamic locations.
#any line beginning with # or / is ignored
#first good line must be the project name
FortuneDr20160419
#UTM coordinates are meters, Zone is number and hemisphere (N or S)
#GeoID
G000
G000
G000
Static measurements over an identified location with
Dynamic survey for detection and classification of
Static measurement over a non-anomalous location
Static measurement made to confirm SBG location is
Static survey of emplaced IVS targets for QC purposes
IVS)
A direct test of all sensor component responses to a
standard object placed at a precisely know location
DataType
SBG
SAM
SAM
Description
an unknown anomaly source
potential MEC
valid
Dynamic survey of an IVS used for QC purposes
(relative to the sensor).
Static all other
Dynamic all other
TargetID easting
AaBBBB0
Aa000000
Aa000001
northing zone
598256 4139854 10N
598256 4139852 10N
598256 4139850 10N
25