Flashforge Adventurer3 Quick Start Manual page 5

Power Switch
Language
Status
Calibration Home
<
1/ 3
6. Click [tools]-[setting] in turn to enter page like this, turn to page two, click [move].
Click the upper arrow in the moving page to make the extruder raises for removing the
paper box on the bottom easier.
FilamentCheck
< <
5. Plug the power cable into the input on the
back and turn on the power switch, the touch
screen is turned on.
Move Camera
Led
<
2 / 3
7. Open the front door, take out the paper box inside
the printer, printer unpacking completed.
04
X: 20.00 Y: 45.00 Z: 36.00
Y
X
Z