Pump Matrix - 2150 - Graco Husky Sanitary Series Instructions-Parts List Manual

Pump Matrix - 2150

Pump Matrix - 2150
Husky 2150 Stainless Steel Sanitary Pumps
Your Model No. is marked on the pump's serial plate. To
determine the Model No. of your pump from the follow-
ing matrix, select the six digits which describe your
pump, working from left to right. The first digit is always
D, designating Husky diaphragm pumps. The remaining
five digits define the materials of construction. For
example, a pump with an aluminum air motor, stainless
Diaphragm
Pump
Air Motor
D (for all pumps) F Aluminum
(Standard)
G Aluminum
(Remote)
V Stainless Steel
(Standard)
W Stainless Steel
(Remote)
Model
Same as DFS666, except with different inlet and outlet configuration. Use DFS666 module to determine repair parts.
Model 234362
Same as DFS888, except with different inlet and outlet configuration. Use DFS888 module to determine repair parts.
42
steel fluid section, stainless steel seats, PTFE balls, and
PTFE diaphragms is Model No.
replacement parts, refer to the part lists on pages 46-48.
The digits in the matrix do not correspond to the ref.
nos. in the parts drawing and lists on pages 22 and 23.
-
Fluid Section Seats
S Sanitary Stain- 3 (316 SST with
-
less Steel PTFE o-rings)
B (316 SST with
-
FDA fluo-
roelastomer
o-rings)
6 (Santoprene®
-
with PTFE
o-rings)
C (Santoprene®
-
with FDA fluo-
roelastomer
o-rings)
7 (Buna-N)
-
8 (fluoroelas-
-
tomer)
D F S B 1 1.
Balls Diaphragms
1 (PTFE) 1 (PTFE)
6 (Santoprene®) 6 (Santoprene®)
7 (Buna-N) 7 (Buna-N)
8 (fluoroelas- 8 (fluoroelas-
tomer) tomer)
To order
309528L