Pressure Relief Procedure
Read warnings, page 5. Relieve pressure before
cleaning or repairing gun.
1.
Engage piston safety lock.
CAUTION
Air supply is required for gun actuation. Do not dis-
connect gun air supply until fluid pressure is relieved.
2.
Close fluid valves A and B. Leave air inlet (W)
open.
B
A
3.
Disengage piston safety lock.
310649C
4.
Actuate gun onto cardboard or into waste con-
tainer to relieve pressure.
5.
TI3850A
Engage piston safety lock.
Fluid in the hose and proportioner is still under pres-
sure. Follow the Pressure Relief Procedure in the pro-
portioner manual.
To relieve pressure in the hose after the gun is
removed, place the fluid manifold over containers, fac-
ing away from you. Very carefully open the fluid
valves. Under high pressure, fluid will spray sideways
from the fluid ports.
TI4752A
TI3849A
Pressure Relief Procedure
TI4753a
TI3850A
TI2484A
13