Advertisement
Align the exhaust extension (D) with the silencer
(E).
Never reuse exhaust system clamps and
gaskets that have been subjected to
operating temperature. Always replace
with new components.
Only new exhaust system clamps and
gaskets may be removed and refitted for
adjustment purposes during initial
installation.
Fit and tighten a new spherical clamp (3).
Tightening torque
Spherical clamp
Fit the connector cross member (Z).
Tighten the screws indicated.
Tightening torque
Screw
For vehicles with single oil heat exchanger
Fit the connector cross member (Z).
Tighten the screws indicated.
Tightening torque
Screw
Nm
Class
35 Nm
B
Nm
Class
25 Nm
B
Nm
Class
25 Nm
B
Advertisement
