Advertisement
Check the water pump drive belt tension (
Refit the central flat undertray section (
Removing the A.C. compressor - power steering pump - alternator drive belt
The engine ancillary drive belt must be replaced at the intervals specified in the MAINTENANCE SCHEDULE.
Remove the water pump drive belt (
Fit the water pump drive belt (A) over the torsion
damper.
Turn the crankshaft, as during removal, and use
a sharp tool to fit the NEW water pump drive
belt (A) onto the pump.
Ensure that the belt sits correctly in the relevant
groove.
A3.12).
Fit the power steering system pipe mounting
brackets (1) in the relative seats on the
steering box bushings and fasten by
tightening the nuts (2).
Tightening torque
Nut
E3.12).
A3.12).
Nm
Class
9 Nm
B
Advertisement
