Advertisement
Tightening torque
Fastening heads to crankcase
Products to use: MOLYKOTE BR2
Nut (pretightening)
Nut (with 90° angle)
Replace the gasket (B), fitting the new
component correctly.
Apply CAF 4 in the indicated points on the top
and bottom sides of the gasket.
Fit the cylinder head on the respective stud bolts.
Fit the washers, with the knurled side in contact
with the cylinder head.
Apply MOLYKOTE BR2 grease to the upper
surfaces of the washers and to the stud bolt
threads.
Hand-tighten the indicated nuts.
Nm
Class
60 Nm
A
+15
0
85
Nm
-15
Advertisement
