Other Component Exchange; Function Test - TCL Alcatel POP4-10 4G&VF Repair Document

Hide thumbs Also See for Alcatel POP4-10 4G&VF:
Table of Contents

Advertisement

L2 Repair Document
Note: packaging method please refer item "APPENDIX 1 Packaging Requirements".

9 Other component exchange

The other components exchange such as
1)
Speaker
2)
Camera
3)
Other related mechanical components
Please follow the detail steps 5.3 (Disassembly and assembly process).
But need to be very careful to handle the components with related special tool or jig (especially replacing
new components)
It is better to handle it with plastic tools (plastic tweezers and wedge etc.).
Besides operator must wear anti-static gloves, fingertips or wear static loop during the whole process of
components exchange.

10 Function test

During the function test, the following items must be checked and validated.
1)
Cosmetic aspect of the handset,
2)
The Software Technical sticker state on the Board
3)
Switch on the handset
4)
Default welcome message
Open "Calculator" application, and input "0x0-0+=" to start the auto test
5)
Requirements
1.
Any L3 PCBA which has appearance like below cases is not acceptable.
Return of PCBA process
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
9030G/9030Q/VDF1400 Level 2 Repair Document
TCL
Communication Ltd.
APPENDIX 1 Packaging
Page
39/44

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alcatel 9030gAlcatel 9030qAlcatel vfd1400

Table of Contents