Perle IOLAN. Information to configure your Perle IOLAN can be found in the IOLAN SCR User’s Guide and in the IOLAN SCR CLI Guide on the Perle website and the IOLAN SCR1618 RDAC Quick Start Guide that came with your product.
Page 3
Perle IOLAN even if Perle has been advised or the possibility of such damages or they are foreseeable or for claims by any third party.
Page 4
Warning: In case of malfunction or damage, no attempts at repair should be made by the user. Do not dismantle this product. In case of malfunction or damage, contact Perle Technical support. Avertissement: En cas de dysfonctionnement ou de détérioration, aucune tentative de réparation ne doit être effectuée par l'utilisateur.
Page 5
être altérée. Warning: In case of malfunction or damage, no attempts at repair should be made. Do not dismantle the product. All repairs need to be made by a qualified Perle representative. Contact Perle Systems Technical support. Avertissement: En cas de dysfonctionnement ou de dommage, aucune tentative de réparation ne doit...
Page 6
Modifications to this product not authorized by Perle could void the FCC approval and negate your authority to operate the product.
Page 7
Modifications to this product not authorized by Perle could void the FCC approval and negate your authority to operate the product.
Publishing History Publishing History Date Revision Update Details March 2020 A.03.01.2020 Initial release of the IOLAN SCR series. IOLAN SCR1618 RDAC Hardware Installation Guide...
The IOLAN SCR gives you a way to access serial devices remotely from anywhere there is a network connection. For infrastructure management, the Perle IOLAN SCR will provide the most versatile access to your IT equipment's serial consoles whether in a large scale data center or remote branch.
The IOLAN has two power connectors located on the back. The power switches should be in the off position when connecting the power cords. Warning: Before servicing this product ensure the power source has been disconnected. IOLAN SCR1618 RDAC Hardware Installation Guide...
No config Flashing Green System has fully booted and there was not a start-up-config file in NVRAM Safe Mode The unit is in safe mode. Flashing Amber WAN High- No power Availability/IP Heath LED 2 IOLAN SCR1618 RDAC Hardware Installation Guide...
Page 13
1 interface. ACTIVE WAN High-availability mode = Load- share IP Health is configured and enable on at Amber one or more least 1 interface. load-sharing WAN WAN High-availability mode = Load- interfaces are share INACTIVE/FAILED IOLAN SCR1618 RDAC Hardware Installation Guide...
6. Start a terminal emulation program (such as Putty or SecureCRT) on the COM port where you have connected the cable to the PC. IOLAN SCR1618 RDAC Hardware Installation Guide...
Page 15
• 1 stop bit • No parity • None (flow control) 8. Press the Enter key on the keyboard and the login prompt will display. 9. The login is admin and password is superuser. IOLAN SCR1618 RDAC Hardware Installation Guide...
Note: Cat5e cables are recommended for 1000 Mbps connections. Ethernet Ports Ethernet Link Status Left LED Right LED Description Amber 1000 Mbps/flashes with activity Green Amber 100 Mbps/flashes with activity Green 100 Mbps/flashes with activity No LAN connection IOLAN SCR1618 RDAC Hardware Installation Guide...
1. Disconnect the fiber cable from the SFP module. 2. If the SFP module is equipped with a clasp, move it to the locked position and use the clasp to pull the SFP towards you. IOLAN SCR1618 RDAC Hardware Installation Guide...
Ensure that cable implements the proper the TX to RX crossover. Once the device is connected and link is established the link LEDs will turn on. The SFP LEDs will begin to flash once data activity is initiated. Resetting the IOLAN Reset / Factory Default / Safe Mode IOLAN SCR1618 RDAC Hardware Installation Guide...
IOLAN SCR User’s Guide for more details on these methods. WebManager The Perle WebManager is an embedded Web based application that provides an easy to use a browser interface for managing the IOLAN. This interface provides the ability to configure and manage the IOLAN through any standard desktop web browser.
Up to 3,048 meters (10,000 feet) Standards and Certifications Safety UL/ULC/EN 62368-1 (previously 60950-1) CE Mark CAN/CSA-C22.2 No. 62368-1-14 EMI/EMC FCC 47 Part 15 Subpart B Class A or better ICES-003 (Canada) EN55011(CISPR11) EN55032 (CISPR32) EN55024 IOLAN SCR1618 RDAC Hardware Installation Guide...
Page 21
Technical Specifications EN61000-3-2 Limits for Harmonic Current Emissions EN61000-3-3 Limits of Voltage Fluctuations and Flicker EN61000-4-2 (ESD): Contact: EN 61000-4-3 (RS): EN 61000-4-4 (EFT): EN61000-4-5 (Surge): EN 61000-4-6 (CS): EN 61000-4-8 (PFMF): EN 61000-4-11 IOLAN SCR1618 RDAC Hardware Installation Guide...
Do not use solvents or cleaning agents on this unit Keep vent holes clear of debris If case gets dirty wipe with a dry cloth Ensure all cables are in working condition IOLAN SCR1618 RDAC Hardware Installation Guide...