Advertisement
Quick Links
_____________________________________
This guide covers basic installation and configuration and is
intended for first time setup or product evaluation.
Complete details can be found in the following guides at
www.perle.com/downloads.
•
IOLAN SCR User's Guide
•
IOLAN SCR Command Line Reference Guide
•
IOLAN SCR1618 RDAC Hardware Installation Guide
What's in the box?
•
IOLAN SCR Chassis
✓ 16 RS232 RJ45 Ethernet ports
✓ 16 RS232 serial RJ45 ports
•
Quick Start Guide (this guide)
•
Rack Mount Kit
What's you need to supply
•
Serial cables to connect serial devices to your IOLAN
•
Ethernet CAT5e 10/100/1000BASE-T cables to connect
Ethernet devices to your IOLAN
Setting up the IOLAN SCR
1.
Connecting dual or single power to the IOLAN SCR.
2.
Configuring the IOLAN SCR.
3.
Connecting Ethernet devices.
4.
Connecting Serial devices.
IOLAN SCR1618 RDAC Quick Start Guide – 5500463-11 (Rev B)
Version #A05.29.2020
IOLAN SCR1618 RDAC
Quick Start Guide
Advertisement
Related Manuals for Perle IOLAN SCR1618 RDAC
Summary of Contents for Perle IOLAN SCR1618 RDAC
- Page 1 Ethernet devices to your IOLAN Setting up the IOLAN SCR Connecting dual or single power to the IOLAN SCR. Configuring the IOLAN SCR. Connecting Ethernet devices. Connecting Serial devices. IOLAN SCR1618 RDAC Quick Start Guide – 5500463-11 (Rev B) Version #A05.29.2020...
- Page 2 SCR Front View SCR Back View...
- Page 3 Connecting the Power Connect 1 or 2 power to power sources. Once power is connected, the IOLAN will cycle through several sequences. The LED 1, PWR 1 and 2 will show solid green when the IOLAN is fully booted and ready to configure. If dual power was used, then both PWR LEDs and LED 1 and 2 will be lit.
- Page 4 SGMII copper. Connecting the Fiber Ensure that the cable implements the proper TX to RX crossover. Once the device is connected and the link is established the corresponding SFP LED will turn green. © 2020 Perle Systems Limited. All rights reserved.